 |
| |
|
MSG-2050 GPS Signal Generator
 (Production Discontinuance) Replacement : MSG-2050A |
 |
|
|
The MSG-2050 is a signal generator designed for generating the simulation signal of GPS (Global Positioning System) satellite.
This unit can be used for adjustment and inspection of car-navigation systems with GPS receivers and relative GPS receivers, and it has been developed for control all functions by GP-IB in addition to simple operation, and also by RS-232C.
This unit is most suitable for using in the production lines, and is compact and lightweight signal generators with the output terminal for data signal of C/A, NAVI and etc. |
| ■ |
Frequency stability of internal reference oscillator is less then 5×10-7 |
| ■ |
Rapid changing output level and the level range is from -80dBm to -140dBm |
| ■ |
Doppler shift function is not built-in |
| ■ |
The output terminal is DC-cut to able to connect to the powered antenna cable. |
| ■ |
All NAVI data preset by GP-IB line and also RS-232C. |
| ■ |
An automatic Z count increment function is equipped so as to synchronize with real time clock. |
| ■ |
The front panel operation can be programmed by GP-IB and RS-232C. |
| * |
The application program is attached. |
| Frequency Characteristics |
| Frequency |
1.57542GHz |
| Indication |
VFD display |
| Accuracy |
5×10-7 |
|
| Output Characteristics |
| Output range |
-80dBm to -140dBm in 1dB step |
| Indication |
VFD display |
| Accuracy |
±1.0 dB for -80dBm to -140dBm |
| Output impedance |
50Ω, VSWR less than 1.2 |
| Spurious output |
Less then -40dB at second harmonic |
| Setting |
Can be set with shuttle knob, GP-IB, RS-232C |
|
| Modulation |
| Modulation method |
BPSK direct sequence spread spectrum modulation |
| Indication |
VFD display |
| Modulation code |
37 C/A codes |
| Channel |
SV1 to SV37 |
| Modulation frequency |
1.023MHz clock |
| Data modulation |
C/A code synchronized divider, 50bps BPSK |
| NAVI data |
50bps test pattern |
| Setting |
Can be set with shuttle knob, GP-IB, RS-232C |
| Z count |
Automatic increment function is equipped so as to synchronize with real time clock. |
|
| Interface Function |
| Parallel interface |
GP-IB (Complying with IEEE standard 488-1975) |
| Serial interface |
RS-232C |
|
| General Data |
| Operating temperature range |
+10ºC to +40ºC |
| Power requirement |
AC90V to 240V, 50/60Hz |
| Dimensions |
Approx. 240(W) × 100(H) × 350(D)mm |
| Weight |
Approx. 3.7kg |
|
| * |
Specifications are subject to change without notice. |
|
| |
