 |
| |
|
High-grade LCR Meter MIM-1222 provides characteristic evaluation of passive components under the same conditions as actual use conditions of the D.U.T. by continuous test frequency range which covers wide test frequency with 5 digits resolution.
The advantage of MIM-1222 is Multi-Step Mode which enables user to define test conditions up to 30 steps, and save and recall Max. 64 programs on a built-in memory. This function allows user to perform a series of characteristic evaluation which contains various measurement parameters easily.
The great advantage of MIM-1222 is Graphic Sweep Function; it graphs a parameter against frequency or AC drive level.
Comparator Function compares measurements of D.U.T. with specified upper limits and lower limits of primary parameter, and displays the HIGH/PASS/LOW result in Analog Scale Indicator. Either absolute measurement units or percentage limits are selectable. In addition, Analog Scale Indicator helps user to intuitively know adjustment status of variable component.
Special software enables full remote control and collecting measurement data is attached as standard equipment.
The MIM-1222 can be widely used in not only production lines but also R & D purpose because of the abundant measurement/indication function and wide LCD display. |
| ■ |
Comprehensive measurement functions. Providing all frequently used measurement parameters. |
| |
lZl, R, X, lYl，G，B，Cs，C，L，D，Q，θ, ESR, Rdc，Δ%, |
| ■ |
Test Frequency Accuracy |
: ±0.01% |
| |
Test Frequency Resolution |
: 5 digits |
| |
Measurement Basic Accuracy |
: ±0.1% |
| ■ |
Wide LCD display and soft key realize straight forward intuitive operation. |
| ■ |
Graphic Sweep Function |
| |
This function graphs a parameter against frequency or AC drive level. Characterizing a parameter graphically helps user to understand how the passive component performs under different conditions. |
| Measurement Item |
| Measurement Parameters |
lZl, R, X, lYl，G，B，Cs，C，L，D，Q，θ, ESR, Rdc，Δ%, |
Measurement Circuit: Series or Parallel Mathematical Function:
Absolute and Percentage Deviation |
|
| Test Signal |
| Test Frequency Range |
20Hz to 1MHz 5 Digits Resolution |
| Test Frequency Accuracy |
±0.01% |
| Output Impedance |
100Ω |
| AC Test Signal Level |
10mV to 2Vrms, 1mVrms steps |
| Measurement Parameters |
Measurement Range |
| lZl, R, X |
0.1mΩ to 100MΩ |
| lYl, G, B |
10nS to 1.000S |
| C |
0.01pF to 1F |
| L |
0.01nH to 100kH |
| D |
0.00001 to 9.9999 |
| Q |
0.1 to 9999.9 |
| θ |
-180º to +180º |
| Rdc |
0.1mΩ to 100MΩ |
| Δ% |
-999.99% to 999.99% |
| Basic Accuracy |
±0.1% lZl, R, X, lYl, G, B, C, L |
| Measurement Speed |
DC Max: 30ms, Fast: 60ms, Medium: 120ms, Slow: 500ms |
| AC Max: 75ms, Fast: 150ms, Medium: 450ms, Slow: 600ms |
| LCD Display |
320×240 Graphic Display |
| Calibration Mode |
Open Circuit Trimming and Short Circuit Trimming |
| Comparator Mode |
Primary Parameters, Absolute Measurement Units or Percentage |
| Comparator Indication |
HIGH/PASS/LOW and Beep |
| Measurement Ranging |
Absolute Measurement Units or Percentage limits Measurement Ranging Auto or Hold |
| Trigger Mode |
Auto or Manual |
| Connection |
4 Terminals BNC Guarded Connections |
|
| General Data |
| Power Requirement |
AC90 to 132V AC198 to 264V |
| Line Frequency |
50/60Hz |
| Operating Temp. Range |
10ºC to 40ºC |
| Guarantee Temp. Range |
18ºC to 28ºC |
| Dimensions |
Approx. 340 (W) ×150 (H) ×525 (D) mm |
| Weight |
Approx. 6.5kg |
| Software |
Measurement software for PC |
|
| Test leads, fixtures, accessories, etc. are available. Please refer to the accessory catalog or contact us |
|
| * |
Specifications are subject to change without notice. |
|
| |
